Switching The Milk System On And Off (Option); Switching The Instant System On And Off (Option) - Melitta Cafina XT4 Operating Instructions Manual

5�7 Switching the milk system on and off
(option)
If you do not want to dispense milk products or if you
want to take the milk preparation system out of service
temporarily, you can switch off the milk system. One
application would be, for example, that in canteen
operation the milk system is cleaned and shut down for
close of business to prevent germs, but coffee can still
be dispensed.
Note
Before switching off the milk system, the
cleaning program must be run each time (see
chapter 8.7 on page 29).
1. Open the manager menu (see chapter 7.1.1 on
page 21).
2. Select the tab "Configuration" (see chapter 7.7 on
page 27).
3. Press the "Mode" button.
5
Configuration Mode
Clock on
main view
2
Mode
milk system
1
Mode
instant system
4. Set "Mode milk system" (2) to "Off".
͵ All products containing milk are grayed out in the
dispensing view.
9 The milk system is switched off.
The products will be available again only after the system
has been switched on again.
1. On the tab "Configuration" under "Mode" set "Mode
milk system" (2) to "On".
͵ The milk system is rinsed.
2. Refill the milk as described in chapter 5.2.3 on
page 13.
9 The milk system is ready for operation.
Operation
Font size of
product names Standard
(1. line | 2. line)
Change password
Ein
"Manager"
Ein
Operating mode Waiter
Fig. 15: Configuration of the mode
16
5�8 Switching the instant system on and off
(option)
If you do not want to dispense instant products or if
you want to take the instant preparation out of service
temporarily, you can switch off the instant system.
1. Open the manager menu (see chapter 7.1.1 on
page 21).
2. Select the tab "Configuration" (see chapter 7.7 on
page 27).
3. Press the "Mode" button.
4. Set "Mode instant system" (1) (see Fig. 15) to "Off".
͵ All products containing instant are grayed out in
the dispensing view.
9 The instant system is switched off.
The products will be available again only after the system
has been switched on again.
CAUTION
Danger of burns on the beverage outlet!
Hot water runs out of the beverage outlet when the
mixer unit is rinsed.
• Do not reach underneath the outlets.
1. On the tab "Configuration" under "Mode" set "Mode
instant system" (1) (see Fig. 15) to "On".
͵ The mixer unit is rinsed.
2. Refill the instant powder as described in chapter 5.2.2
on page 12.
9 The instant system is ready for operation.
35878 • 20201001