Recommended Torque Settings For Disc Brakes On Your Scott Bike - Scott TIME TRIAL MACHINE Owner's Manual

RECOMMENDED TORQUE SETTINGS FOR DISC BRAKES ON YOUR
SCOTT BIKE
Component
Brake calliper mount
on frame/fork
Brake lever unit on handlebars
- Single-bolt clamp
- Two-bolt clamp
Union screws of cable at grip
and normal cable at brake calliper
Brake cable connector at
brake calliper (disc tube cable)
Expansion tank cap
Bleeding device brake calliper
Bleeding device brake lever
Brake disc fixing (6-holes)
Brake disc fixing (centerlock)
Hose (union nut) direct connection
Slave cylinder (bleeder screw)
Brake pad retainer at brake calliper
Cable clamp at brake calliper
www.shimano.com
1
These values are reference values of the above-mentioned component manu-
facturers. Be sure to observe the values in the manuals of the component manu-
facturers. These values do not apply to the components of other manufacturers.
WARNING
Some components have the maximum permissible torque values printed on
them. Use a torque wrench and never exceed the maximum torque value! If
you are in doubt or if you have any questions, contact your SCOTT dealer.
NOTICE
Due to the unmanageable number of components on the market, SCOTT is not
in a position to foresee every product that will be replaced or newly assembled
by third parties. Therefore SCOTT denies any liability for such kind of additions
or modifications with regard to compatibility, torque values etc. Whoever
assembles or modifies the SCOTT bike shall ensure that the bike was assembled
according to the state of the art in science and technology.
| 114 ENGLISH
Shimano
0.3 - 0.5
0.5 - 1
40 - 50
www.sram.com www.tektro.com
2 3
SRAM/Avid
1
(Nm) (Nm)
6 - 8 9.5
4 - 8 3 - 5.5
3
5 - 7 5
5 - 7 5
4 - 6
4 6.2
5 - 7
2 - 4 1
6 - 8
www.trpbrakes.com
4
Tektro TRP
2 3 4
(Nm) (Nm)
6 - 8 6 - 8
5 - 7 3 - 5
5 - 6
4 - 6
4 - 6 4 - 6
40
3 - 5
6 - 8 6 - 8
www.magura.com
5
OWNER'S MANUAL 2021
Magura HS
5
(Nm)
6
4
4
3
4
0.5
4
4
4
2.5
| ROAD BIKE