5.9. Write the data link table into CS1D-CPU□□SA (CX- Integrator)
Write the data link table stored in the CS1D-CPU□□S into the CS1D-CPU□□SA using the CX-Integrator.
If it is not required to read the data link table in this section, skip the following procedures.
(1)Double-click the I/O Table and the Unit setup from the workspace of the CX-Programmer to open the
I/O table.
(2)Select the PLC from the I/O table.
(3)Start the CX-Integrator. (Options – Start Special Application - Start with Settings Inherited)
29