Omron CS1D-CPU S Series Replacement Manual page 38

Following window is displayed when the routing table has been transferred correctly.
（8）Close the Data link table setting.（File – Exit）
（9）Change the status of CX-Integrator to offline.
Click the icon: Work online to change
the status to offline.
（10）Close the CX-Integrator. (File – Exit)
Do you want to save changes to new project? Click No.
（11）If you use several networks in the CPU unit, read each data link table setting, individually.
Carry out the step 1 through 10 described in the section 5. It takes several minutes
33