Replace The Unit To Cs1D-Cpu□□Sa; Write Data Into Cs1D-Cpu□□Sa. (Cx-Programmer) - Omron CS1D-CPU S Series Replacement Manual

5.6. Replace the unit to CS1D-CPU□□SA
(1) Turn off the equipment.
(2) Remove the CS1D-CPU□□S from the CPU Backplane (CS1D-BC082S).
(3) Attach the CS1D-CPU□□SA to the CPU Backplane (CS1D-BC082S).
(4) Check the unit is firmly attached to the equipment, and turn on the power.
5.7. Write data into CS1D-CPU□□SA. (CX-Programmer)
Write ladder programs, PLC system settings, and the data memory into the CS1D-CPU□□SA using the
CX-Programmer.
(1) Connect the CS1D-CPU□□SA to a PC with connection cables for peripheral tools.
(2) Connect the PLC to online (PLC – Work online)
(3) Transfer programs, PLC system settings, I/O table, CPU BUS unit settings, variable table, comments, and
program index. (PLC – Transfer –To PLC)
(1) Check all boxes.
(2) Click OK.
23