Mitsubishi Electric ME96 Super-S Series Manual page 25

‡Operation (for ME96SSHB-MB)
»Display Change
Press , the measurement display switches over.
DISPLAY
When the and
DISPLAY
2 seconds or more, the display will change in reverse order.
Example of display switching of measurement screen (Phase wire system: 3-phase 4-wire, Display pattern: P01)
DISPLAY
DISPLAY
<The 1 in 9 screens> <The 2 in 9 screens>
st nd
1 line: Current 1 line: Current
st st
2 line: Voltage 2 line: Voltage
nd nd
3 line: Active power 3 line: Reactive power
rd rd
4 line: Active energy 4 line: Reactive energy
th th
Screen number display
DISPLAY
When you switch the screen, the left screen appears momentarily.
DISPLAY
It indicates the screen number of the next screen.
DISPLAY DISPLAY
DISPLAY DISPLAY
<The 9 in 9 screens> <The 8 in 9 screens>
th th
1 line: - 1 line: -
st st
2 line: - 2 line: -
nd nd
3 line: Apparent energy 3 line: Reactive energy
rd rd
(upper 3 digits) (upper 3 digits)
4 line: Apparent energy 4 line: Reactive energy
th th
(lower 6 digits) (lower 6 digits)
»Maximum/Minimum Display Values
Press the MAX/MIN button to change to the maximum and minimum values
of the display screen. Press it again to return to the current value display screen.
Reset Maximum/Minimum Values
»
Press the button for 2 s to reset the maximum/minimum values of
RESET
the measurement items displayed. The maximum/minimum values will
become the current values.
Press the and
RESET
maximum/minimum values. The maximum/minimum values will become the current values.
»Displaying Active energy/Reactive energy/Apparent energy
Active energy (Imported) Active energy (Exported)*
Reactive energy
(Imported,lag)
Change the unit (M, k, none) or increase the digits in the bottom display for power used/reactive power used/apparent power
used/time-based power used to check the lower/higher-order digits. Push the
between screens.
Active energy (imported): Example of switching 012, 345, 678, 901, 234, 567 Wh
Push concurrently
for 2 seconds.
Unit: M
Reset Active energy/Reactive energy/Apparent energy
»
Press the ,
SET RESET
active energy/reactive energy/apparent energy (this operation only works on the current value display screen).
buttons are held down for
DISPLAY DISPLAY
DISPLAY DISPLAY
<The 3 in 9 screens> <The 4 in 9 screens>
rd th
1 line: Current 1 line: Active power
st st
2 line: Voltage 2 line: Reactive power
nd nd
3 line: Apparent power 3 line: Power factor
rd rd
4 line: Apparent energy 4 line: Active energy
th th
DISPLAY DISPLAY
DISPLAY DISPLAY
<The 7 in 9 screens> <The 6 in 9 screens>
th th
1 line: - 1 line: Current demand
st st
2 line: - 2 line: Current demand
nd nd
3 line: Active energy N-phase
rd
(upper 3 digits) 3 line: Voltage
rd
4 line: Active energy 4 line: Active energy
th th
(lower 6 digits)
buttons simultaneously for 2 s to reset all
Apparent energy
Reactive energy Reactive energy
(Imported,lead)* (Exported,lag)*
and
Low order zooming
and buttons simultaneously for 2 s to reset all of the following together:
PHASE
»Changing Phases
Press
PHASE
over.
Example of display switching (Phase wiring system: 3P4W)
DISPLAY
PHASE
DISPLAY
1 line: Current average value
st
2 line: Voltage average value
nd
(L-N)
3 line: Active power (total)
rd
4 line: Active energy (imported)
th
PHASE
PHASE
1 line: Current Phase 3
st
2 line: Voltage Phase 31
nd
3 line: Active power Phase 3
rd
4 line: Active energy (imported)
th
<The 5 in 9 screens>
th
1 line: Current
st
2 line: Current
nd
N-phase
3 line: Frequency
rd
4 line: Active energy
th
Example of display switching between the current value
display screen and MAX/MIN value display screen
Current value display screen
* To display these screens,
it is necessary to change
the settings for active/reactive energy
measurement method in menu 3.1.
Reactive energy
(Exported,lead)*
and buttons simultaneously for 2 s to switch
Unit: None
, the current phase and the voltage phase switches
PHASE PHASE
1 line: Current Phase 1 1 line: Current Phase 2
st st
2 line: Voltage Phase 1N 2 line: Voltage Phase 2N
nd nd
3 line: Active power Phase 1 3 line: Active power Phase 2
rd rd
4 line: Active energy (imported) 4 line: Active energy (imported)
th th
PHASE PHASE
1 line: Current Phase 2 1 line: Current Phase 1
st st
2 line: Voltage Phase 23 2 line: Voltage Phase 12
nd nd
3 line: Active power Phase 2 3 line: Active power Phase 1
rd rd
4 line: Active energy (imported) 4 line: Active energy (imported)
th th
MAX/MIN
MAX/MIN value display screen
Unit: k
1 line: Current Phase 3
st
2 line: Voltage Phase 3N
nd
3 line: Active power Phase 3
rd
4 line: Active energy (imported)
th
PHASE
1 line: Current average value
st
2 line: Voltage average value
nd
(L-L)
3 line: Active power (total)
rd
4 line: Active energy (imported)
th
24