Mitsubishi Electric ME96 Super-S Series Manual page 23

eAnalog output CH1
eSet the details for "analog output CH1."
detailed settings
(The following settings can be made separately from the measurement items included in the display pattern.)
(1) If analog output is selected for current, current demand, voltage,
power, reactive power, power factor (set-up menu: 6.6.1)
Output item
A
Demand A
V
W
var
DISPLAY SET
PF
(2) If analog output is selected for current, current demand, power
(set-up menu: 6.6.2)
Output item
A
Demand A
W
rAnalog output CH2-4
rSet the output item for "analog output CH2-4."
output item
The setting procedure is the same as that of qAnalog output CH1 output item .
DISPLAY SET
tSet the details for "analog output CH2-4."
The setting procedure is the same as that of wAnalog output CH1 detailed settings .
tAnalog output CH2-4
detailed settings
ySet the upper limit for analog output (same for all channels).
DISPLAY SET
yAnalog output limit
Note: Skip this setting when the analog output of all channel output items is set to "non."
SET
Set-up menu Select another set-up menu or end set-up.
‡To continue to set-up
Select the menu
No. using the
Setting range
CT primary current value (value set for set-up menu 1.4.1 primary current setting )
SP. (special primary current value)
+10 steps (approx. 250%)
±0 steps (100%: Standard value)
−18 steps (approx. 20%)
+3 steps (approx. 120%)
±0 steps (100%: Standard value)
−18 steps (approx. 20%)
−0.5-1-0.5
Setting range
+3 steps (approx. 120%)
±0 steps (100%: instrument rating)
−10 steps (approx. 40%)
Positive-only Positive/Negative
Setting Explanation
oFF Output to +5% of upper limit and -5% of
(no limit) lower limit (with respect to span value)
on Output to +1% of upper limit and -1% of
(limit) lower limit (with respect to span value)
or button.
mA
20 20
12 12
−0-1-0
4
−
0.5 1 0.5
<Positive-only>
mA
20
4
0
40 kW
y
‡To finish set-up
Press the or button
to display the End screen,
then press the button
SET
to save settings.
e(1)
DISPLAY SET
e(2)
mA
4
−
0 1 0
<Positive/Negative>
mA
20
DISPLAY SET
12
4
−
40 kW 0 40 kW
To next channel settings
22