Vertical Mode - RadioLink A560 Instruction Manual

3d fixed wing vertical flight with 1 switch
Table of Contents

Advertisement

RadioLink Electronic Ltd
www.radiolink.com
Flight mode setup of other transmitter from RadioLink is the same. Channel 5 and channel 7
are for flight mode setup by default. First select the model type of fixed wing in the setting
menu, then set a three-way switch(Ch5) and a two-way switch(Ch7) in the auxiliary channel
menu. Five flight modes can be switched with this combination.

2.4.1 Vertical Mode

Vertical Flight Mode can be changed with one switch and control as multicopter, pilots can
make the fixed wing automatically fly with the vertical posture. Tutorial video can be checked
via
https://youtu.be/N2Gm4OUhu-c
At this mode, A560 will keep vertical attitude automatically. The attitude algorithm of flight
controller will convert the joystick output to the horizontal coordinates and control with full
posture.
Below is the picture illustration with Mode 2 as example:
When the aircraft is vertical, toggle the aileron joystick(Ch1) to control the aircraft moving left
or right.
If the joystick on right is toggled to left, A560 flights to left horizontally.
If the joystick on right is toggled to right, A560 flights to right horizontally.
When the aircraft is vertical, toggle the elevator joystick(Ch2) to control the aircraft moving
forward or backward.
Note If keep toggling this joystick upward, the aircraft will flight forward with a certain angle.
11

Advertisement

Table of Contents
loading

Table of Contents