Editing Records - Mircom TAS-2000 Series User Manual

Programming

Editing Records

To edit a record, you must be in Programming Mode. Refer to Entering Programming Mode on
page 2 for instructions
Step 1: Enter Edit Record mode
Add New Record
>Edit Record
Step 2: Select record
1000>
1001
Step 3: Enter Dial Code
Enter Dial Code
[ _ _ _ _ ]
Step 4: Enter Relay Code
Enter Relay Code
[ _ _ _ _ ]
Step 5: Enter NSL-ID
Enter NSL-ID
[ _ _ ]
Step 6: Enter Elevator Code
Enter Elevator Code
[ _ _ ]
8
1. Press (scroll up) or
0
2. Press when the arrow is pointed beside "Edit
Record". The display enters Edit Record mode.
1. Press (scroll up) or
record you want to change.
2. Press when the arrow is beside the record you
want to change. The display now enters the record.
Note: Records are listed according to resident dial
code.
• If you want to change the dial code, enter a code
that is between 1 to 4 digits long. Press
and continue.
• If you do not want to change the dial code,
press to continue.
1. Enter the relay code.
2. Press to save and continue.
1. Enter the NSL-ID.
2. Press to save and continue.
• If elevator control is not being used, press
continue.
• If elevator control is being used, please contact your
technician for assistance.
(scroll down).
(scroll down) to find the
to save
to