Mircom TAS-2000 Series User Manual page 11

Step 7: Enter Keyless Code
Enter Keyless Code
[ _ _ _ _ ]
Step 8: Enter Ring Pattern
Enter Ring Pattern
[ _ _ ]
a. 01: Standard North American ring
02: Distinct two long rings
03: Distinct quick ring, one long ring
04: Distint quick ring, one long ring, one quick ring
You have successfully added a new record to the system. The display now returns to the
programming menu.
To add another record,
1. Press to scroll one step up.
0
2. Press . This will bring you back into the Add New Record mode. Repeat steps 2 through 8.
• If keyless codes are being used, enter the 4-digit
code. Press to save and continue.
• If keyless codes are not being used, press
save and continue.
1. Select the ring pattern (01 to 04)
2. Press to save and continue.
TAS-2000 NSL System User's Guide
to
a
.
7