Programming; Adding New Records - Mircom TAS-2000 Series User Manual

Programming

Programming

Adding New Records

To add a new record, you must be in Programming Mode. Refer to Entering Programming Mode
on page 2 for instructions.
Step 1: Enter Add New Record mode
>Add New Record
Edit Record
Step 2: Enter Dial Code
Enter Dial Code
[ _ _ _ _ ]
Step 3: Enter Relay Code
Enter Relay Code
[ _ _ _ _ ]
Step 4: Enter NSL-ID
Enter NSL-ID
[ _ _ ]
Step 5: Enter Elevator Code
Enter Elevator Code
[ _ _ ]
Step 6: Enter Elevator ID
Enter Elevator ID
[ _ _ ]
6
0
Press to add a new record. The display enters Add
New Record mode.
1. Enter the resident's dial (door) code. The code may
be between 1 to 4 digits long.
2. Press to save and continue.
1. Enter the relay code.
2. Press to save and continue.
1. Enter the NSL-ID.
2. Press to save and continue.
• If elevator control is not being used, press
save and continue.
• If elevator control is being used, please contact your
technician for assistance.
• If elevator ID is not being used, press
and continue.
• If elevator ID is being used, please contact your
technician for assistance.
to
to save