Mircom TAS-2000 Series User Manual page 13

Step 7: Enter Elevator ID
Enter Elevator ID
[ _ _ ]
Step 8: Enter Keyless Code
Enter Keyless Code
[ _ _ _ _ ]
Step 9: Enter Ring Pattern
Enter Ring Pattern
[ _ _ ]
a. 01: Standard North American ring
02: Distinct two long rings
03: Distinct quick ring, one long ring
04: Distint quick ring, one long ring, one quick ring
You have successfully edited the record. The display now returns to the previous menu.
• To edit another record repeat steps 2 through 9.
• To exit the Edit Record mode, press
• If elevator ID is not being used, press
continue.
• If elevator ID is being used, please contact your
technician for assistance.
• If keyless codes are being used, enter the 4-digit
code. Press to save and continue.
• If keyless codes are not being used, press
continue.
1. Select the ring pattern (01 to 04)
2. Press to save and continue.
9
to return to the programming menu.
TAS-2000 NSL System User's Guide
to
to
a
.
9