Programming; Adding New Records - Mircom TAS-2000 Series User Manual

Programming

Adding New Records

To add a new record, you must be in Programming Mode. Refer to Entering Programming Mode
on page 2 for instructions.
Step 1: Enter Add New Record mode
>Add New Record
Edit Record
Step 2: Enter resident's name
Enter Name
[_ _ _ _ _ _ _ _ _ _]
Step 3: Enter Dial Code
Enter Dial Code
[ _ _ _ _ ]
Step 4: Enter Relay Code
Enter Relay Code
[ _ _ _ _ ]
Step 5: Enter NSL-ID
Enter NSL-ID
[ _ _ ]
Step 6: Enter Elevator Code
Enter Elevator Code
[ _ _ ]
Step 7: Enter Elevator ID
Enter Elevator ID
[ _ _ ]
0
Press to add a new record. The display enters Add
New Record mode.
1. Enter the resident's name (see page 16 for
instructions). The name may be up to 15
characters long.
2. Press to save and continue.
1. Enter the resident's dial (door) code. The code may
be between 1 to 4 digits long.
2. Press to save and continue.
1. Enter the relay code.
2. Press to save and continue.
1. Enter the NSL-ID.
2. Press to save and continue.
• If elevator control is not being used, press
save and continue.
• If elevator control is being used, please contact your
technician for assistance.
• If elevator ID is not being used, press
and continue.
• If elevator ID is being used, please contact your
technician for assistance.
TAS-2000 NSL System User's Guide
to
to save
17