Allegion LOCKNETICS NC450 Series Installation Instructions

Specifications
NC450 series of electric strikes are designed for use with cylindrical locksets and accommodate latchbolts up to 9/16" throw. The
strikes can be configured to fail-safe or fail-secure on site.
Operating Voltage 12VDC or 24VDC
(voltage non-polarized)
Voltage Tolerance ± 10%
Current Draw
Dual Voltage:
300mA/12VDC, 150mA/24VDC
Operating Temperature
For indoor use: 14°F to 120°F (-10°C to + 49°C)
Strike Humidity 0% to 85% Non-condensing
Latch Throw 9/16" (15mm) maximum
Keeper Width
1 7/16" (36mm)
Static Strength
1500 lbs (680Kg)
Dynamic Strength 70 ft-lbs
Endurance Test 250,000 cycles
Strike Body
Faceplate
Keeper
Latch Monitor
(when applicable)
Wiring Diagrams
Included in box:
(Square and Radius)
Red & Black: 12VDC
White & Red: 24 VDC
(Non-polarized)
For details regarding the limited warranty:
Customer Service
1-877-671-7011 www.allegion.com/us
Electric Strike Installation Instructions
Latch
Model
Monitor
NC450
NC450-LBM
Optional Faceplates:
6 7/8" NCCFP-KIT
(US32D, US10B)
CAUTION
Overheated or burnt coils caused by incorrect voltage/wire
harness combinations will not be covered under warranty
Dual Voltage (Non-polarized)
Black
Black
White
Green
Red
Red
White Red
Green
Black
White
Red
NC450 Series
Body Latch
Construction
Throw
9/16"
Zinc Alloy
(15mm)
7 15/16" NCWFP-KIT
(US32D, US10B)
24 VDC
© Allegion 2019
47267374 Rev. 03/19-a