Table of Contents
Advertisement
KNX – DALI
TM
Intesis
4.2.5 Sending the configuration to Intesis
When the configuration is finished, follow the steps to program the gateway.
1.- Click on Save button to save the project to the project folder on your hard disk (more information in
Intesis MAPS User Manual).
2.- You will be prompted to generate the configuration file to be sent to the gateway.
a.- If Yes is selected, the file containing the configuration for the gateway will be generated and
saved also into the project folder.
b.- If NO is selected, remember that the binary file with the project needs to be generated before
the Intesis starts to work as expected.
3.- Press the Send File button to send the binary file to the Intesis device. The process of file transmission
can be monitored in the Intesis Communication Console window. Intesis will reboot automatically once the
new configuration is loaded.
After any configuration change, do not forget to send the configuration file to the Intesis using the
button "Send".
4.2.6 Diagnostic
To help integrators in the commissioning tasks and troubleshooting, the Configuration Tool offers some specific
tools and viewers.
In order to start using the diagnostic tools, the connection with the Gateway must be stablished.
The Diagnostic section is composed by two main parts: Tools and Viewers.
•
Tools
Use the tools section to check the current hardware status of the box, log communications into
compressed files to be sent to the support, change the Diagnostic panels' view or send commands
to the gateway.
•
Viewers
In order to check the current status, viewer for the Internal and External protocols are available. It
is also available a generic Console viewer for general information about communications and the
gateway status. Finally, a Signals Viewer to simulate the BMS behavior or to check the current
values in the system.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 4.4 Intesis MAPS Receive/Send tab
User Manual r1.1 EN
URL
https://www.intesis.com
23 / 34
Advertisement
Table of Contents
