Configuration Tab; Signals - HMS Networks Intesis DALI User Manual

KNX – DALI
TM
Intesis

4.2.3 Configuration tab

Select the Configuration tab to configure the connection parameters. Three subsets of information are shown in
this window: General (Gateway general parameters), KNX (KNX interface configuration) and DALI (DALI channel
and DALI devices configuration).
General, KNX and DALI tabs are explained in Intesis MAPS user manual for Intesis KNX Server Series.

4.2.4 Signals

All available registers, its corresponding description and other main parmaters are listed in the signals tab.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 4.2 Intesis MAPS configuration tab
Figure 4.3 Intesis MAPS Signals tab
User Manual r1.1 EN
URL https://www.intesis.com
22 / 34