Waeco AirCon Service Center Operating Manual page 40

Operation
21. In the basic menu, use the cursor keys  or  to select
"Free selection":
22. Press ENTER to confirm.
23. If necessary, use the keypad (7) to enter the data and press ENTER
to confirm.
If no data is to be entered, press ENTER to switch to the next
program step.
24. Deselect "Rec/Recycling phase ?" using No (the chosen setting
flashes) and press ENTER to confirm.
25. Select "Vacuum phase ?" (the chosen setting flashes) and press
ENTER to confirm.
26. If necessary, use the keypad (7) to enter the data and press ENTER
to confirm.
If no data is to be entered, press ENTER to switch to the next pro-
gram step.
27. Select "Filling phase?" (the chosen setting flashes) and press
ENTER to confirm.
28. Enter the refrigerant filling quantity (note the oil filling quantity of the
compressor).
29. Then follow the instructions on the display (6).
Select the setting (which then flashes) and press ENTER to confirm.
30. Select "Process start ?" with ENTER.
✓ After filling is complete, you will be prompted to disconnect the hoses
of the AirCon Service Center from the vehicle air conditioning system.
31. Disconnect the service hoses (10) and (11) and press ENTER to
confirm.
The service hoses are then emptied. The unit is then ready for
further use.
32. Screw the valve caps onto the connections of the vehicle air
conditioning system.
40
S h o r t s e l e c t i o n
F r e e s e l e c t i o n
O t h e r s e l e c t i o n s
E N T E R - O K
VAS 6380B / VAS 6381B