Putting In The Containers For Oil And Uv Additive - Waeco AirCon Service Center Operating Manual

VAS 6380B / VAS 6381B
7.7

Putting in the containers for oil and UV additive

The current supply quantities are displayed in the standby menu.
1. Open the cover flap (20) on the left side and push the containers into
the snap locks:
– Container for fresh oil (17)
– Container for UV additive (18) and
– Used oil container (19)
2. Close the cover flap (20).
3. Enter the container size for fresh oil and UV contrast agent (see
chapter "Entering the container size (only for VAS 6381B)" on
page 20).
Initial startup
17
18
19
20
19