Table of Contents
Advertisement
4.4. Installation with foot (optional)
Observe Fig. 1, Fig. 5, Fig. 6 (page 11, 14, 15).
1. Attach the foot 1 using the screws enclosed 2 to the bottom of the heater.
Please note that the round recess is on the evaporator side.
2.
the corresponding screws. Observe the minimum distances for the heater
shown in Fig. 1.
WARNING!
on the substrate onto which the sauna cabin is built – NOT on the
Fig. 5 Installing the foot on the Concept R mini
2
1
Fig. 6). Depending
Advertisement
Table of Contents
