Installation With Foot (Optional) - Harvia sentiotec Concept R mini combi Instructions For Installation And Use Manual

Installation instructions, for professionals only

4.4. Installation with foot (optional)

Observe Fig. 1, Fig. 5, Fig. 6 (page 11, 14, 15).
1. Attach the foot 1 using the screws enclosed 2 to the bottom of the heater.
Please note that the round recess is on the evaporator side.
2. Affix the foot using the screws enclosed to the floor (Fig. 6). Depending
on the floor conditions, use the enclosed wood screws or anchors with the
corresponding screws. Observe the minimum intervals for the heater shown
in Fig. 1.
WARNING!
Risk of fire
● Affix the heater with the foot on a sufficiently solid substrate,
e.g. on the substrate onto which the sauna cabin is built – NOT on
the floor covering of the sauna.
Fig. 5 Installing the foot on the Concept R mini combi
2
1
p. 14/34