DEVIreg™ 330 (+60 °C to +160 °C)
Table of Contents
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1
1.2
2
3
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4
1
Introduction
DEVIreg™ 330 is an electronic thermostat to be installed in
electric cabinets with DIN rail attachment. The thermostat
must be installed via an all-pole disconnection switch.
Either a wire sensor or an external air sensor must be used
to measure and control the desired temperature.
The thermostat has a button to adjust the temperature set-
ting, with a scale from +60 °C to +160 °C. An LED indicator
shows standby periods (green light) and heating periods
(red light).
More information on this product can also be found at:
devi.com
Installation Guide
3
Need help?
Do you have a question about the DEVI DEVIreg 330 and is the answer not in the manual?
Questions and answers