Mounting Instructions - Danfoss DEVI DEVIreg 330 Installation Manual

• If temperature wire sensor is applied on conductive
surface it must be installed with additional electrical
insulation.
• Caution: temperature sensor, heated surface and heat-
ing cable could have really high temperature.
• Sensor, conduit, fixing materials, etc. should be speci-
fied to be able to withstand temperatures applied by
application.
• Caution: Temperature sensor with silicon cable should
not be installed in concrete, aggressive and corrosive
environment, etc.
2

Mounting Instructions

Please observe the following placement guidelines:
• Install the thermostat in an electric cabinet with DIN
rail attachment or a separate DIN attachment accord-
ing to local regulation on IP classes.
• Do not place the thermostat in a way that it will be
exposed to direct sunlight.
Follow the steps below to mount the thermostat:
1. Click the thermostat on to the DIN rail attachment.
2. Connect the thermostat according to the connection
diagram.
6
DEVIreg™ 330 (+60 °C to +160 °C)
Installation Guide