Lenovo ThinkSmart Hub User Manual page 20

If you have set both the supervisor password and the system management password, the supervisor
password overrides the system management password.
Password considerations
A password can be any combination of up to 128 alphabetic and numeric characters. For security reasons, it
is recommended to use a strong password that cannot be easily compromised.
Note: The BIOS passwords are not case sensitive.
To set a strong password, consider the following guidelines:
• Have at least eight characters in length
• Contain at least one alphabetic character and one numeric character
• Not be your name or your user name
• Not be a common word or a common name
• Be significantly different from your previous passwords
Set, change, and remove a password
Before you start, print these instructions.
1. Restart the hub. When the logo screen is displayed, press F1 or Fn+F1.
2. Select Security.
3. Depending on the password type, select Set Supervisor Password or Set System Management
Password and press Enter.
4. Follow the on-screen instructions to set, change, or remove a password.
Note: A password can be any combination of up to 128 alphabetic and numeric characters. For more
information, see "Password considerations" on page 14.
5. Press F10 or Fn+F10 to save the changes and exit.
14
ThinkSmart Hub User Guide