Enable Or Disable The Automatic Power-On Feature; Enable Or Disable The Erp Lps Compliance Mode; Change The Ice Performance Mode; Exit The Bios Menu - Lenovo ThinkSmart Hub User Manual

Enable or disable the automatic power-on feature

The Automatic Power On item in UEFI BIOS provides various options for you to make your hub start up
automatically.
To enable or disable the automatic power-on feature:
1. Restart the hub. When the logo screen is displayed, press F1 or Fn+F1.
2. Select Power ➙ Automatic Power On and press Enter.
3. Select the feature as desired and press Enter.
4. Enable or disable the feature as desired.
5. Press F10 or Fn+F10 to save the changes and exit.

Enable or disable the ErP LPS compliance mode

The hub meets the eco-design requirements of the ErP Lot 26 regulation. For more information, go to:
https://www.lenovo.com/us/en/compliance/eco-declaration
You can enable the ErP LPS compliance mode to reduce the consumption of electricity when the hub is off
or in sleep mode.
To enable or disable the ErP LPS compliance mode:
1. Restart the hub. When the logo screen is displayed, press F1 or Fn+F1.
2. Select Power ➙ Enhanced Power Saving Mode and press Enter.
3. Depending on whether you select Enabled or Disabled, do one of the following:
• If you select Enabled, press Enter. Then, select Power ➙ Automatic Power On and press Enter.
Check whether the Wake on LAN feature is disabled automatically. If no, disable it.
• If you select Disabled, press Enter. Then, go to the next step.
4. Press F10 or Fn+F10 to save the changes and exit.
When the ErP LPS compliance mode is enabled, you can wake up the hub by doing one of the following:
• Press the power button.
• Enable the Wake Up on Alarm feature to make the hub wake up at a set time.

Change the ICE performance mode

You can adjust the acoustic and thermal performance of your hub by changing the ICE performance mode.
To change the ICE performance mode:
1. Restart the hub. When the logo screen is displayed, press F1 or Fn+F1.
2. Select Power ➙ Intelligent Cooling Engine (ICE) and press Enter.
3. Select ICE Performance Mode and press Enter.
4. Set the ICE performance mode as desired.
5. Press F10 or Fn+F10 to save the changes and exit.

Exit the BIOS menu

To exit the BIOS menu, do one of the following:
. 17
Chapter 6 UEFI BIOS