ThinkSmart Hub Hardware Deployment Guide for all UC Platforms ThinkSmart Hub Hardware Deployment Guide for all UC Platforms Version 1.1 08/2020 Note: This guide covers general hardware deployment steps, and is a companion to the “ThinkSmart Hub Configuration Guide for your selected Unified Communication platform”. Visit https://support.lenovo.com...
Target Rooms The ThinkSmart Hub scales well to many room sizes, but out of the box it is ideal for small to medium/large rooms. These are typically huddle rooms, team rooms, and conference/meeting spaces. The four microphones on the ThinkSmart Hub are tuned for a 360-degree audio capture and the distance from the ThinkSmart Hub to an in-room participant should be no greater than approx 4.5m/14ft x 8.5M/27ft.
One Cable Ports Integrated Touch Display The ThinkSmart Hub features a 10.1” touch display that is permanently affixed to the base, but it can rotate 360 degrees so that anyone around the table can control the meeting. This touch display is the control panel where meetings are started, participants are managed and the ThinkSmart Hub is configured.
USB 3.0 UC Platform compliant Customer provided camera What’s Inside the Box Lenovo ThinkSmart Hub factory installed with Windows 10 IoT and Microsoft Teams Rooms or Zoom Room software Lenovo ThinkSmart One Cable 6ft Lenovo Power Adapter Cable Management Security Box (black block)
Mount security box with Blocks of One Cable, if desired Cable Management The ThinkSmart Hub delivers a custom single cable management solution designed to cleanly run the cables off the tabletop while keeping all connections secure. Once connected, the back of the device will...
ThinkSmart Hub Hardware Deployment Guide for all UC Platforms One Cable Connection Security Box Connection Steps – One Cable Red Side to Hub Base 1. Lay the ThinkSmart Hub on its side with the ports facing upward.
ThinkSmart Hub Hardware Deployment Guide for all UC Platforms 2. Insert an HDMI cable into HDMI Ingest port on inner right sidewall of base, lace it through the security channel and set it into the rounded notch. 3. On the red side of One Cable, slide the plastic cover down to reveal the blocks of...
ThinkSmart Hub Hardware Deployment Guide for all UC Platforms 4. Align the connectors labeled ‘Step 1’ and ‘Step 2’ to the ports on the base. Gently push the connectors into the corresponding ports, moving from right to left. Keeping the device on its side with the ports/cables facing up, slide the red cover along One Cable, align HDMI ingest cable to the notch and snap cover into place.
Block Side of One Cable. Connect USB Camera The ThinkSmart Hub has three standard USB 3.0 ports and one USB C that support any compatible USB peripheral. You will be connecting a USB camera to the ThinkSmart Hub for video capture. In larger rooms, other peripheral options are satellite/extended microphones.
6. Connect a USB camera into any of the 4 USB ports Connect External HDMI Display(s) The ThinkSmart Hub has two HDMI OUT ports that can drive two external displays up to 4kresolution. You should plan to connect at least one external display.
(not included). Add box top and security screw. The box can then be mounted under a table, on a wall or behind a display Power On Device Power on the ThinkSmart Hub by pressing the button on edge of device.
ThinkSmart Hub Hardware Deployment Guide for all UC Platforms Configure ThinkSmart Hub To complete installation of your ThinkSmart Hub, please refer to the companion document, “ThinkSmart Hub Configuration Guide for your Unified Communication Platform”. Version History Date Version Comments •...