Table of Contents
Advertisement
The "Connection via web pages,"
NOTE:
page 5) may NOT be necessary if your system includes a NAVigator System Manager.
Connection via web pages
Connection to the encoder and its embedded web pages can be made via either the front panel Configuration (USB) port (using IP over
USB technology) (see figure 2,
Access the encoder using HTML pages as follows:
Start a web browser.
1.
NOTES:
•
Suggested browsers to fully support the NAV system are: Google Chrome™, Mozilla™ Firefox™, and Microsoft Edge™.
•
The network must be properly configured for multicasting (IGMP). Failure to do so may result in degraded performance.
Enter the IP address of the encoder in the browser Address field.
2.
NOTE
:
•
Default settings:
Port
Config (USB)*
NAV 1G (RJ-45)
* For the Config port, the address for IP over USB CANNOT be changed.
If the unit does not receive a DHCP address, a self-assigned Link Local Address, is assigned in the range 169.254.X.X.
Press the keyboard <Enter> key. The browser displays a privacy error message (see figure 3 for an example in the Chrome browser).
3.
1 1 1 1 1 1
1 1 1 1
1 1 1 1
1 1 1 1
2 2 2 2 2 2
2 2 2 2
2 2 2 2
2 2 2 2
Privacy Error Message (in Chrome Browser)
Figure 3.
Click Advanced (see figure 3,
4.
Click Proceed to <IP address> (unsafe) (
5.
Enter the Username (see figure 4,
6.
embedded encoded web pages (see
NOTES:
•
The default Username is admin.
•
The factory configured passwords for all accounts on this device have been set to the device serial number. If the password
is reset, the encoder defaults to the default password, which is extron.
•
Usernames and passwords are case sensitive.
Connection settings
A
on page 2) or the rear panel NAV 1G port (see figure 1,
DHCP
IP address
203.0.113.22
On
). The button changes to Hide Advanced and explanatory text and a link appear below the button.
1
2
). The browser opens to the Login dialog box (see figure 4).
) and Password (
1
2
figure 5
on page 4).
(see page 4), and
Pairing devices via front panel
C
Subnet mask
) and click Sign In (
3
). The browser opens to the home page of the
procedures (see
on page 1).
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3 3 3
Login Dialog Box
Figure 4.
3
Advertisement
Table of Contents
Need help?
Do you have a question about the NAV E 101 DTP and is the answer not in the manual?
Questions and answers