Leica TP1020 Manual page 2

Step 2: Starting a program
The program on display is always the last one that has been in use.
1
The last program is often the number
To start a program, press start
For to change the program:
Select the desired program number by pressing PLUS or MINUS
To start the selected program immediately, press START again
Step 3: Remove the specimens
To switch off the function up and down, press THREE ARROW
Lift the carousel.
Allow for the tissue basket to drain in that position.
Lift the tissue basket slightly with your hand and pull it out of the basket
holder
In horizontal movement.
Lower the carousel