Seicane S126011 Installation

For 2008-2013 subaru forester impreza

SKU: 101525 Model:S126011

Seicane 2008-2013 SUBARU Forester Impreza car radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid

scratching it during its detachment and installation. Please keep handy any parts from the car

and make use of all the original screws from the car as much as possible. so each related part of

the unit can be fixed securely.

4. For your convenience, here's the recommended tools for removal and installation from

Seicane, please check for more details:

srd-400

www.seicane.com

http://www.seicane.com/car-dvd-dismantling-device-

Table of Contents

Do you have a question about the S126011 and is the answer not in the manual?

Page 1 SKU: 101525 Model:S126011 Seicane 2008-2013 SUBARU Forester Impreza car radio after installation Tips about the installation: 1.Please disconnect the power before the installation. 2.Please prepare a lever and a screwdriver before the removal and the installation. 3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation.
Page 2 2008-2013 SUBARU Forester Impreza car radio installation guide 1. The original car radio. 2. Pry around the trim panel with a lever. 3. Remove the trim panel with your hands.
Page 3 9. Connect the Seicane car radio to your original car radio 's plugs. 10. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn't, please check whether all the cables are connected correctly.
Page 4 11.Put the new Seicane radio into the dash. 12. Put everything into their original place.

101525