Seicane S168027 Upgrade Installation Replacement Instruction

For 2011-2014 hyundai sonata aftermarket car stereo head unit

www.seicane.com

Seicane S168027 2011-2014 Hyundai SONATA aftermarket car

stereo head unit upgrade installation replacement instruction

Seicane S168027 2011-2014 Hyundai SONATA car radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid

any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here's the recommended tools for removal and installation from

Seicane, please check for more details:

http://www.seicane.com/car-dvd-dismantling-device-srd-

400

Table of Contents

Do you have a question about the S168027 and is the answer not in the manual?

Page 1 Seicane S168027 2011-2014 Hyundai SONATA aftermarket car stereo head unit upgrade installation replacement instruction Seicane S168027 2011-2014 Hyundai SONATA car radio after installation Precautions for this installation: 1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
Page 2 2011-2014 Hyundai SONATA car radio installation steps 1.Remove the side panels with your hands. 2. Unscrew two screws with a screwdriver. 3. Pry around the edges of the panel of the a/c control with a lever.
Page 3 4. Take the a/c control out of the dash. 5. Unplug the connectors at the rear of the a/c control. 6. Remove four screws holding the factory radio in place with a screwdriver.
Page 4 11. Connect the Seicane car radio to your original car radio 's plugs. 12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn't, please check whether all the cables are connected correctly.