Seicane S121013 Upgrade Installation Replacement Instruction

For 2013 2014 2015 vw volkswagen tiguan aftermarket car radio

Seicane S121013 2013 2014 2015 VW Volkswagen Tiguan aftermarket

car radio upgrade installation replacement instruction

Seicane S121013 2013 2014 2015 VW Volkswagen Tiguan car stereo after installation

There are some tips for you before the installation:

1. Please apply the parking brake and remove the negative cable on the vehicle battery

before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

3. For your convenience, here's the recommended tools for removal and installation from

Seicane, please check for more details:

http://www.seicane.com/car-dvd-dismantling-device-srd-400

www.seicane.com

Table of Contents

Need help?

Do you have a question about the S121013 and is the answer not in the manual?

Page 1 Seicane S121013 2013 2014 2015 VW Volkswagen Tiguan aftermarket car radio upgrade installation replacement instruction Seicane S121013 2013 2014 2015 VW Volkswagen Tiguan car stereo after installation There are some tips for you before the installation: 1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
Page 2 2013 2014 2015 VW Volkswagen Tiguan car stereo installation guide 1. Remove the top panel with a plastic knife. 2. Remove four screws holding the factory radio with a screwdriver. 3. Take the factory radio out of the dashboard.
Page 3 4. Pull out the connectors at the back of the factory radio. 5. Check all the accessories for the new Seicane car stereo. 6. Connect the harnesses to the back of the new Seicane car stereo.
Page 4 7. Connect the Seicane car stereo to your original car radio 's plugs, and put the new Seicane car stereo into the dash. 8. Turn on the new Seicane car stereo and check whether the radio is working properly.