13 Additional Information; Warranty Information And Terms Of Use; Conformity Declarations - FLARM FUSION PowerFLARM User And Maintenance Manual

FLARM Technology Ltd
Hinterbergstrasse 15
CH-6330 Cham

13 Additional Information

13.1

Warranty Information and Terms of Use

Any warranty is immediately void should the device be opened, misused, or
installed incorrectly. EULA including Terms of use is applicable. The latest version
available when this manual was published can be found in Appendix C.
13.2

Conformity Declarations

FLARM Technology Ltd, Hinterbergstrasse 15, CH-6330 Cham, Switzerland,
declares that the product PowerFLARM Fusion in Hardware Version FLAFUS*** and
typical configuration, meets the requirements of the CE mark.
The communications conformity meets the requirements of EN 300 220 (power
class 9), EMC Conformity EN 301 489 (class 3 SRD-Device, equipment type I). The
device is in accord with the requirements of the European R&TTE Directive.
FCC ID:
2AXJM-FLAFUS10W
This device complies with Part 15 of the FCC. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Within the USA, the device may only be used in transportation vehicles such as
aircraft or motor vehicles.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
POWERFLARM
FUSION USER AND
MAINTENANCE
MANUAL
Date: 2020-11-10
Version: 1.0
Page: 42 of 49
Document Number:
FTD-078