Selective Zone Alert / Evacuation Test; All Circuits Evacuation Test; Selective Zone Evacuation Test - Simplex 4100 Operator's Manual
Emergency warning and intercommunication system ewis
Hide thumbs
Also See for 4100:
- Operator's manual (100 pages) ,
- Service instructions manual (98 pages) ,
- Installation manual (97 pages)
Table of Contents
Advertisement
SIMPLEX 4100 EWIS
OPERATOR MANUAL
5.3
SELECTIVE ZONE ALERT / EVACUATION TEST
Push the switch momentary UP or DOWN for the selected zone.
ALERT TONE should be an output on all speaker circuits for the selected
zone.
To cancel, push the associated momentary switch in the UP or DOWN position.
5.4
ALL CIRCUITS EVACUATION TEST
Push the ALL CIRCUIT EVACUATION switch momentary UP or DOWN.
EVACUATION TONE should be an output on all speaker circuits.
To cancel, push the associated momentary switch in the UP or DOWN position.
5.6
SELECTIVE ZONE EVACUATION TEST
Push the switch momentary UP or DOWN for the selected zone.
EVACUATION TONE should be an output on all speaker circuits for the
selected zone.
To cancel, push the associated momentary switch in the UP or DOWN position.
Document No.: 4100-M010A
May 1999
Page 19
Issue 3.1
Advertisement
Table of Contents
