How To Manually Initiate An Alert / Evacuation Signal; Alert Signal Operation; Evacuation Signal Operation - Simplex 4100 Operator's Manual

Page 10
2.10

HOW TO MANUALLY INITIATE AN ALERT / EVACUATION SIGNAL

2.10.1

Alert Signal Operation

To manually initiate an ALERT signal, do the following:
1. To alert ALL areas:
a.
b.
To alert specific areas:
a.
b.
2. To turn OFF the ALERT tone to ALL ZONES or SELECTED ZONES, push the
associated momentary switch in the UP or DOWN position.
2.10.2

Evacuation Signal Operation

To manually initiate an evacuation signal, do the following:
1. To evacuate ALL areas:
a.
b.
To evacuate specific areas:
a.
b.
2. To turn OFF the EVAC tone to ALL ZONES or SELECTED ZONES, push the
associated momentary switch in the UP or DOWN position.
Document No.: 4100-M010A
Turn Evac keyswitch to MANUAL position.
Operate the momentary UP or DOWN position of the ALL ZONES
ALERT Switch. This will broadcast the alert tone to all areas.
Turn Evac keyswitch to MANUAL position.
Operate the momentary UP or DOWN position of the required
area ZONE ALERT Switch. This will broadcast the alert tone to
the selected area.
Turn Evac keyswitch to MANUAL position.
Operate the momentary UP or DOWN position of the ALL ZONES
EVAC Switch. This will broadcast the evacuation tone to all areas.
Turn Evac keyswitch to MANUAL position.
Operate the momentary UP or DOWN position of the required
area ZONE EVAC Switch. This will broadcast the evacuation tone
to the selected area.
May 1999
SIMPLEX 4100 EWIS
OPERATOR MANUAL
Issue 3.1