Fault Messages; Figure 3 Operator Interface Panel - Simplex 4100 Operator's Manual

Page 4 SIMPLEX 4100 EWIS
OPERATOR MANUAL

1.1.2 Fault Messages

Fault messages from the audio system are shown on the alphanumeric display and
entered into the Fault Log. The operator uses the operator interface panel keys to
acknowledge the fault, silence the alarm, and reset the fault condition (refer Figure 3).
See Section 4, Fault Conditions for required operations.
Figure 3 Operator Interface Panel
Document No.: 4100-M010A May 1999 Issue 3.1