Wip Operation - Simplex 4100 Operator's Manual

Page 14
3.4

WIP OPERATION

To operate the WIPs do the following:
1. To Call a WIP from the Main panel:
a.
b.
c.
2. To answer a WIP CALL:
a.
b.
c.
Document No.: 4100-M010A
Lift the master WIP Handset from its cradle.
Push the required zone WIP switch to the momentary UP
position. The remote WIP will ring and the RED LED will
go steady when the REMOTE WIP is answered.
To cancel call, push the selected zone WIP switch to the
momentary DOWN position. The RED led will turn off.
Now replace the master WIP handset to its cradle.
The RED WIP zone LED on the main panel will flash when
a remote is lifted of its cradle.
To answer the call at the main panel, Lift the master WIP
handset of its cradle and push the Zone WIP switch
associated with the flashing LED to the momentary UP
position to establish the connection.
To cancel call, push the selected zone WIP switch to the
momentary DOWN position. The RED led will turn off.
Now replace the master WIP handset to its cradle.
May 1999
SIMPLEX 4100 EWIS
OPERATOR MANUAL
Issue 3.1