Receiving Tray Installation - Horizon Fitness SPF-10II Manual

6. Installation Instruction
6-1 Installation Instruction

6-1-3 Receiving Tray Installation

A. CCR(DX)(Criss-Cross Receiving Tray)
(1) Install connector CNC at the delivery end
of SPF-10II with hooks of CNC inserted in
keyhole of SPF-10II.
(2) Connect connector cable of CNC to the
receptacle of SPF-10II.
(3) Install CCR (DX) at the delivery end of
SPF-10II and connect connector of
CCR(DX) to receptacle of SPF-10II.
B. ST-20 (Stacker Type Receiving Tray)
(1) Install connector CNS at the delivery end
of SPF-10II with hooks of CNS inserted in
keyhole of SPF-10II.
(2) Connect connector cable of CNS to recep-
tacle of SPF-10II.
(3) Install ST-20 at the delivery end of SPF-
10II with 3 mm clearance provided be-
tween moveable guide of receiving tray
and the edge of sheets delivered.
(4) Connect connector of receiving tray to
receptacle of SPF-10II.
NOTE
Optional forked connector is required when
ST-20 is installed with SPF-10II.
CNC
CCR(DX)
ST-20/STR
44
CNS