Horizon Fitness SPF-10II Manual page 46

6. Installation Instruction
6-1 Installation Instruction
(7-1) In case of connecting to AC-1200, HAC-
120/15, MC-80 remove upper air hose
and insert air hose of CNP to nipple
on collator.
(7-2) In case of connecting to MAC-Series,
insert air hose of CNM to hole of
air regulator on MAC-80 then fasten
locking knob.
(7-3) In case of connecting to AC-8000/8300S
insert air hose of CNA to a hole of air
regulator on AC-8000S/8300S and then
fasten locking knob.
(8) Feed a set of sheets from collator and stop
sheets at the entrance of SPF-10II. Then,
set up SPF-10II in such a position that
clearance 2 mm to 3 mm is made between
fixed side guide of SPF-10II and edge of
the sheets.
(9) Level SPF-10II and collator by leveling
bolts, and then fasten bolts on connecting
plate (Fig. 6-1-3).
Air Hose
2 to 3 mm
Air Hose
CNA
42
Fixed Side Guide
Sheet to
be run
Connector
Moveable Side
Jogger
AC-8000S
Locking Knob