Zanussi ZOB 482 XL User Manual page 39

Cleaning the oven door
The following instructions explain how to disassemble
the oven door as it is supplied by the Manufacturer.
If your oven door has been reversed, please
note that the references to the right or left side
have to be switched.
Figure 5. With both hands hold the perforated plate A in
position and push it out upwards.
Figure 6. Hold the inner glass B tightly with both hands
and remove it from its original position by sliding it
upwards.
Make sure that glass B is firmly held to
avoid that the glass heel over and fall down.
After removing the inner glass, clean the oven door and
the glass.
We recommend to clean the oven door using only a wet
sponge and dry it after cleaning with a soft cloth. Never
use steel wool, acids or abrasive products as they can
damage the surface.
After cleaning, place the inner glass back in its original
position by inserting it in the rubber distance holders C.
The inner glass B (with side decors) must be
arranged with the decorated surface to the
inner side of the door.
The slight roughness of the printing must not
be discernible when you stroke your fingers
over the visible surface.
After placing the inner glass back:
Figure 7. insert the perforated plate A back in its original
position and check that everything is securely fastened
and firm.
A
Fig. 5
B
Fig. 6
A
C
C
Fig. 7
39