Zanussi ZOB 482 XL User Manual page 30

To set the duration time:
1. Press button " " or "
2. After the setting is carried out, wait for 5 seconds: the
"Cooking Duration" pilot lamp
the display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE: turning the acoustic alarm off will reset the
oven to manual, and if the oven function and the
thermostat knobs are not set to zero the oven will start
to heat again.
To cancel the duration time:
1. Press button repeatedly to select the "Cooking
Duration" function. The relevant pilot lamp
flash and the display will show the remaining cooking
time.
2. Press button " " until the display shows "0:00".
After 5 seconds the pilot lamp will go out and the
display will revert to the time of day.
"End of cooking" function
With this function, you can set the oven to switch off
automatically when a programmed end of cooking time is
over. Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button
repeatedly to select the "End of cooking" function. The
relevant pilot lamp will start flashing. Then, proceed as
follows:
To set the end of cooking time:
1. Press button " " or "
2. After the setting is carried out, wait for 5 seconds: the
"End of cooking" pilot lamp
display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
and the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE: turning the acoustic alarm off will reset the
oven to manual, and if the oven function and the
thermostat knobs are not set to zero the oven will start
to heat again.
To cancel the end of cooking time:
1. Press button repeatedly to select the "End of
cooking" function. The relevant pilot lamp
flash and the display will show the programmed End
of cooking time.
2. Press button " " until the display shows the current
time of day. The programmer will beep and the pilot
lamp will go out.
30
".
will come on and
will
".
will come on and the
will