Table of Contents
Advertisement
Release 08/2020 Ver. 1.0
3. PRODUCT DESCRIPTION
3.1 Sensing edge Shapes and Sizes
Tapeswitch edge sensors are available in a large range of profiles colors and lengths to accommodate most
common applications. See specifications for profile (section 9) dimensions, maximum length and force travel
relationship.
It is the responsibility of the user to evaluate and determine the proper edge sensor profile and dimensions based
on the application in question. Tapeswitch cannot guarantee suitability of a particular edge, for a machine or
application with unique specifications that was not designed by Tapeswitch. The unique parameters of the control
system into which the sensing edge(s) are integrated must be validated by the user. Tapeswitch also takes over
no liability for recommendations which are given or implied in the following description. The following description
implies no modification of the general Tapeswitch terms of delivery, warranty or liability claims.
3.2 Inactive Zone
All standard safety edge sensors have an inactive region at each edge. Please see specific edge sensor profile
for actual inactive diminution in the specification's sections (9) of this manual.
3.3 Lead Options
Tapeswitch Edge sensors have a number of lead options, depending on the application. Cable exit options are
also available, so as to facilitate a "daisy chain" connection (or series connection) between them. Please see
www.Tapeswitch.com
or contact Tapeswitch directly if needed.
3.4 Mounting Channel Options
Most edge sensors are available with multiple options of mounting channels and channel materials based on
design application. See individual edge specification at
the options available.
TAPESWITCH CORPORATION
100 Schmitt Boulevard
Farmingdale, New York, 11753
Installation Manual: Safety Edge
NOTE:
All Lead Configuration Options - Figure 2
www.tapeswitch.com
© 2020 Tapeswitch Corporation. All Rights Reserved
(section 9 in this document) as to
5
Advertisement
Table of Contents
