Table of Contents
Advertisement
Release 08/2020 Ver. 1.0
b) One – 2-conductor cable (black/white or ribbed/smooth) with EOL resistor termination (for use
with PSSR/2 control unit).
Note: When utilizing PSSR/2 controller, all edges, other than the final edge (with EOL resistor
termination) will be called out as "standard four wire" edges.
NOTE: For complete and updated list of Tapeswitch supplied SIM's, as well as
the interface instructions, please see:
and
https://www.tapeswitch.com/support/downloads.html
See PSSR/2 manual for complete connection details:
https://www.tapeswitch.com/support/downloads.html
TAPESWITCH CORPORATION
100 Schmitt Boulevard
Farmingdale, New York, 11753
Installation Manual: Safety Edge
PSSR/2 connection - Figure 16
https://www.tapeswitch.com/sim.html
PSSR/2 schematic connection - Figure 17
© 2020 Tapeswitch Corporation. All Rights Reserved
17
Advertisement
Table of Contents
