Installation - IKEA TREVLIG Manual

Hide thumbs Also See for TREVLIG:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
away from the installation site. After
unpacking the appliance, make sure that it
has not been damaged during transport.
In the event of problems, contact the
dealer or your nearest Aftersales Service.
Once installed, packaging waste (plastic,
styrofoam parts etc.) must be stored out
of reach of children - risk of suffocation.
The appliance must be disconnected from
the power supply before any installation
operation - risk of electric shock.
During installation, make sure the
appliance does not damage the power
cable - risk of fire or electric shock.
Only activate the appliance when the
installation has been completed.
Carry out all cabinet cutting works
before fitting the appliance in the place
and remove all wood chips and sawdust.
If the appliance is not installed above
an oven, a separator panel (not included)
must be installed in the compartment
under the appliance.
ELECTRICAL WARNINGS
It must be possible to disconnect the
appliance from the power supply by
unplugging it if plug is accessible, or by
a multi-pole switch installed upstream of
the socket in accordance with the wiring
rules and the appliance must be earthed in
conformity with national electrical safety
standards.

Installation

Installation process must follow the laws, ordinances, directives
and standards (electrical safety rules and regulations, proper
recycling in accordance with the regulations, etc.) in force in the
country of use!
• For further information on the installation refer to the
Assembly Instruction.
• Do not use silicon sealant between the appliance and the
worktop.
Do not use extension leads, multiple
sockets or adapters. The electrical
components must not be accessible to
the user after installation. Do not use the
appliance when you are wet or barefoot.
Do not operate this appliance if it has
a damaged power cable or plug, if it is
not working properly, or if it has been
damaged or dropped.
If the supply cord is damaged, it must
be replaced with an identical one by the
manufacturer, its service agent or similarly
qualified persons in order to avoid a
hazard - risk of electric shock.
NOTE: People with a pacemaker or similar
medical device should use care when
standing near this induction hob while
it is on. The electromagnetic field may
affect the pacemaker or similar device.
Consult your doctor, or the manufacturer
of the pacemaker or similar medical
device for additional information about its
effects with electromagnetic fields of the
induction hob.
• Make sure that the space underneath the hob is sufficient for
air circulation. Please refer to the Assembly Instruction.
• The bottom of the appliance can get hot. If the appliance
is installed above the drawers, make sure to install a non-
combustible separation panel under the appliance to
prevent access to the bottom. Please refer to the Assembly
Instruction.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

504.678.35

Table of Contents