Daily Use - IKEA TREVLIG Manual

ENGLISH

Daily use

SWITCHING THE HOB ON/OFF
To turn the hob on, press the power button for around 1 second.
To turn the hob off, press the same button again, and all
cooking zones will be deactivated.
POSITIONING
Do not cover the control panel symbols with the cooking pot.
Please note: In the cooking zones close to the control panel,
it is advisable to keep pots and pans inside the markings
(taking both the bottom of the pan and the upper edge into
consideration, as this tends to be larger).
This prevents excessive overheating of the keypad. When grilling
or frying, please use the rear cooking zones wherever possible.
ACTIVATING/DEACTIVATING COOKING ZONES AND
ADJUSTING POWER LEVELS
To activate the cooking zones:
Press the + or - button of the required cooking zone to activate
it and adjust the power. The level will be shown in line with the
area, along with the indicator light identifying the active cooking
zone. The "BOOST" button can be used to select the quick
heating function.
To deactivate the cooking zones:
Press the "0" button to the left of the power adjustment
CONTROL PANEL LOCK
To lock the settings and prevent it being switched on
accidentally, press and hold the OK/Key lock button for 3
seconds. A beep and a warning light above the symbol indicate
that this function has been activated. The control panel is
locked, with the exception of the On/Off
controls, repeat the activation procedure.
There is one timer witch controls each cooking zones button.
To activate the timer:
Select the cooking zone, press the "+" or "-" button to set the
desired time. An indicator light will be activated in line with the
specific symbol
sound, and the cooking zone will switch off automatically.
The time can be changed at any point, and several timers can be
activated simultaneously.
In case the timer is activated "Zone selection indicator" flashes
and the relative cooking time selected is displayed on the
central display.
To deactivate the timer:
Press the "+" and "-" buttons together until the timer is
deactivated.
Timer not available with autofunctions.
The LED of "timer active indicator" indicates that the timer has
been set for the cooking zone.
This function allows to temporarily
hold and then resume cooking processes
maintaining previous settings. The function also freezes all
active timers.
To activate this function press II key.
The symbol II flashes on the display in place of the power levels.
To resume cooking, press
active zone again.
button. To unlock the
TIMER
. Once the set time has elapsed, a beep will
TIMER INDICATOR
PAUSE FUNCTION
II
key and touch the slider of an
9