Technical Data; Installation - IKEA FRAMTID HGC4K Manual

Hide thumbs Also See for FRAMTID HGC4K:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH

Technical data

Rating Plate
Made in Germany
© Inter IKEA Systems B.V. 1999
301.561.89
21552
PQM
The graphic above represents rating plate of
the appliance (without serial number which is
generated dynamically during the production
process), which is located at its underneath
surface of the casing.

Installation

Manufacturer is not responsible for any injury
to persons and pets or damage to property
caused by failure to comply following require-
ments.
Caution! To proceed with the
installation refer to the assembly
instructions.
Warning! Installation process must
follow the laws, ordinances, directives
and standards (electrical safety rules and
regulations, proper recycling in accordance
with the regulations, etc.) in force in the
country of use!
Warning! The appliance must be
earthed!
Warning! Risk of injury from electrical
current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of volt-
age.
Model FRAMTID HGC4K Typ 58 PEE 13 AO 6.5kW
PNC 949 593 389 01 S NO ............... 220V-240V AC 50-60 Hz
Dear Customer, please apply here aside the
sticker you can find in the dedicate plastic
bag inserted inside the hob packaging. This
will allow us to assist you better, by identify-
ing precisely your hob, in case you will need
in future our assistance. Thank you for your
help!
• Loose and inappropriate plug and socket
connections can make the terminal over-
heat.
• Have the clamping connections correctly in-
stalled.
• Use strain relief clamp on cable.
• Follow the connection diagram (it is loca-
ted on the underneath surface of the cast-
ing of the hob).
Important! You must observe the minimum
distances to other appliances and furniture
cabinets or other units according to Assembly
Instruction.
If there is no oven beneath the hob insert a di-
viding panel at a minimum distance of 20 mm
from the bottom of the hob.
Do not use silicon sealant between the appli-
ance and the worktop. Avoid installing the ap-
pliance next to doors and under windows as
hot cookware may be knocked off the rings
when doors and windows are opened.
8
230 V
DGT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents