Technical Data - IKEA TREVLIG Manual

compatible with requested operation.
F0E1
ENGLISH
Wrong power cord connection.
F0E7
The control panel switches off because
F0EA
of excessively high temperatures.
Display code
F0E2, F0E4, F0E6, Disconnect the hob from the power supply.
F0E2, F0E4, F0E6,
F0E8, F0EC, F1E1, Wait a few seconds then reconnect the hob to the power supply.
F0E8, F0EC, F1E1, F6E1,
F6E1, F7E5, F7E6 If the problem persists, call the service centre and specify the error code that appears on the display.
F7E5, F7E6
d E The hob does not switch heat up.
e.g. The functions do not come on.
[when the hob is off]
The hob does not allow a special
function to be activated.
e.g. :
The hob automatically sets a minimum
e.g.
e.g.
power level to ensure that the cooking
[Power level lower
[Power level lower than
zone can be used.
than level requested]
level requested]
SOUNDS PRODUCED DURING OPERATION
Sounds produced during operation
Induction hobs may whistle or creak during normal operation.
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked
These noises actually come from the cookware and are linked to the
to the characteristics of the pan bottoms (for example, when
characteristics of the pan bottoms (for example, when the bottoms are
the bottoms are made from different layers of material or are
made from different layers of material or are irregular).
irregular).
These noises may vary according to the type of cookware used
AFTER-SALES SERVICE and to the amount of food it contains and are not the symptom
of something wrong.
Before calling the after-sales service:
In order to receive a more complete assistance, please register your
1. If there is a fault try to resolve the problem by following
product on www . indesit . com / register.
troubleshooting guidelines.
BEFORE CALLING THE AFTER-SALES SERVICE:
2. Switch the appliance off and back on again to see if the fault
1.
See if you can solve the problem by yourself with the help of the
persists.
suggestions given in the TROUBLESHOOTING.
If after the above checks the fault still occurs, get in touch
2. Switch the appliance off and back on again to see if the fault persists.
with the nearest after-sales service.
You can find a full list of IKEA appointed contacts at the end of
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN
this user manual.
TOUCH WITH THE NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or
follow the instructions on the website www . indesit . com .

Technical data

When contacting our Client After sales service, always specify:
• a brief description of the fault;
Model: TREVLIG 504.678.35
• the type and exact model of the appliance;
Type of hob Type: XXX Mod.: XXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
Made in X XXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Number of cooking zones
Heating technology
Dimension of Heater (Ø or LxW)
Energy consumption per cooking zone - (EC electric cooking)
Energy consumption of the hob - (EC electric hob)
This appliance meets the Eco design requirements of European Regulation n.66/2014, in conformity to the European Standard EN
60350-2
The technical information are situated in the rating plate on the
bottom side of the appliance.
Description
Disconnect the hob from the power supply.
Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
The hob does not allow a special
function to be activated.
The hob automatically sets a
minimum power level to ensure
that the cooking zone can be
used.
01
XXXX XXX XXXXX XX XXXX XXXXX
the cooking zone, or it is not compatible
with one or more cooking zones.
The power supply connection is not
exactly as indicated in "ELECTRICAL
CONNECTION" paragraph.
The internal temperature of electronic
parts is too high.
Possible causes
DEMO MODE on.
The power regulator limits the
power levels in accordance
The power regulator limits the power
with the maximum value set
levels in accordance with the maximum
for the hob.
value set for the hob.
The power regulator limits the
The power regulator limits the power
power levels in accordance
levels in accordance with the maximum
value set for the hob.
with the maximum value set
for the hob.
When contacting our Client After sales service, always specify:
• a brief description of the fault;
These noises may vary according to the type of cookware used and to
• the type and exact model of the appliance;
the amount of food it contains and are not the symptom of something
• the service number (number after the word Service on the
wrong.
rating plate). The service number is also indicated on the
guarantee booklet;
• the service number (number after the word Service on the rating
• your full address;
plate). The service number is also indicated on the guarantee
booklet;
• your telephone number.
If any repairs are required, please contact an authorized after-
sales service (to guarantee that original spare parts will be used
and repairs carried out correctly).
• your full address;
• your telephone number.
If any repairs are required, please contact an authorized after-sales
service (to guarantee that original spare parts will be used and repairs
carried out correctly).
In the case of flush-mounted installation, call the After Sales Service to
request assembly of screws kit 4801 211 00112.
Electric
4
Induction
Left front 15,0 cm
Left rear 21,0 cm
Right rear 18,0 cm
Right front 18,0 cm
Left front 175,1 Wh/kg
Left rear 178,0 Wh/kg
Right rear 170,0 Wh/kg
Right front 171,4 Wh/kg
173,6 Wh/kg
F0E1 code and restore the functionality
of the cooking zone. Then, try to use the
cookware with a different cooking zone, or
use different cookware.
Adjust the power supply connection
according to "ELECTRICAL CONNECTION"
paragraph.
Wait for the hob to cool down before using
it again.
Solution
Follow the instructions in the "DEMO
See paragraph "Power
MODE" paragraph.
management".
See paragraph "Power management".
See paragraph "Power
See paragraph "Power management".
management".
400011415253
HB I84F
PLER8
220-240 V ~ 50-60 Hz
HB I84F
769991010902
I.C.
F101090
11
00
7,2 kW
SERVICE
869991010900
901806030988
SN
802080988