User Programs (Power Save Modes, Auto Clear Time); Setting The Power Save Modes And Auto Clear Time - Sharp AR-121E Operation Manual

HIGH IMAGE QUALITY MODE
Press and hold down the exposure mode selector key for approximately 5 seconds.
2
The manual (
The exposure indicator marked "1" will light up, indicating the standard toner mode is
active.
To enter the high image quality mode, press the dark (
3
The exposure indicator marked "5" will light up, indicating the high image quality mode
is selected.
4
Press the exposure mode selector key twice. The photo (
4
and the AUTO indicator will light up steadily. The high image quality mode is now
active.
To return to the standard mode, repeat the procedure but use the light (
to select exposure level "1" in step 3.
USER PROGRAMS
(power save modes, auto clear time)
The user programs allow the parameters of certain functions to be set, changed, or cancelled
as desired.

Setting the power save modes and auto clear time

Press and hold down the light (
1
5 seconds until all the alarm indicators (
the display.
Use the left copy quantity (
2
time, 2: preheat mode, 3: auto power shut-off timer, 5: auto power shut-off mode). The
selected number will blink in the left side of the display.
18
chap-4_AR121151EX.p65
) indicator will go out and the photo (
) and dark (
) key to select a user program number (1: auto clear
18
) indicator will begin to blink.
) key.
) indicator will stop blinking
) keys simultaneously for more than
, , and ) blink and "– –" appears in
30/11/00, 19:08
) key