Sharp AR-650 Operation Manual page 21

Auto Job Start M ode
If you set the desired copying m odes and press the START key during w arm -up, the copier
autom atically starts copying w hen it becom es READY. Follow the procedure below to set up
the Auto Job Start m ode.
1
Place the original(s) on the original feed
tray or on the glass.
When Using the Automatic Document Feeder
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The num ber of the originals you can set up
at a tim e is show n below .
Letter, Letter-R, Statem ent-R : 60
Note: Rem ove any paper clips or staples from
originals before placing them on the
original feed tray.
When Placing the Original on the Glass
. After lifting the autom atic docum ent feeder,
place the original on the glass face dow n w ith
the bottom tow ard you and the left side
centered against the original scale.
2
Set the desired copy modes.
. The autom atic paper selection (APS) m ode,
auto-exposure m ode and copying of one
original are the default settings.
Downloaded from: http://www.usersmanualguide.com/
Ledger : 30
Legal : 35
Slides
Autom atic
docum ent
feeder
Original
Original
scale
17