Table of Contents
Advertisement
Charging the Battery
For the best performance and to prolong the life
of the battery, we recommend that you charge
the battery at home at room temperature.
Only use the charger if the temperature of
the environment is between 0 and 35
degrees centigrade.
To charge the battery:
1. Unlock the battery by turning the key a
quarter.
2. Push down the lock while pulling the battery
with your other hand.
3. Take the battery pack inside. First connect
the charger to the plug-ensure contact of
the battery. The magnetic plug of the
charger directly connected properly to the
battery.
4. Next plug in the plug of the charger into the
socket. The red LED will light up. The charger is
now charging.
Please note!
properly, the green LED will light up (standby
mode). If the connection is poor, unplug the plug
from the socket and clean the charger's
connector with a dry cloth.
5. The charging time depends on the level of the
battery. The charging time is about 2 hours for a
10.7 Ah and about 4,5 hours for a 24.8 Ah battery.
6. Once the battery is fully charged, the green LED will
be solid. Now first unplug the plug.
7. Then pull the connector from the battery.
8. Put the battery back in the holder of the
cycle and close the lock.
If necessary, the battery can also be charged directly on the cycle.
User manual | Tricycles 20.01
If the battery is not connected
2.
4.
1.
3.
23
Advertisement
Table of Contents
