Advertisement
Available languages
Available languages
5.2 LCD display indicators (for Token 800 model)
UPS Mode
LCD display
UPS Power
on
Standby
Mode
AC Mode
When AVR is functioning,
will flash every second.
Overload in
AC mode
Icons will flash.
Battery
Mode
When battery level is low,
will flash every second .
10
Description
When UPS is powered
on, it will enter this
mode for few seconds.
In standby mode,
no output power is
available.
When the input
voltage is within
acceptable range, UPS
will provide stable AC
power to output. The
UPS will also charge
icon
the batteries in AC
mode.
When overload occurs,
alarm will beep every
0.5 second.
Alarm will beep every
10 seconds.
icon
Self-Test
Mode
Battery
replacement
alarm
Overload
in battery
mode
Icons will flash.
Fault mode
This function is only
activated via software
for the model with
communication port.
Alarm will beep every
2 seconds. Only
available for the model
with communication
function.
When overload occurs,
alarm will beep every
0.5 second.
A fault occurs in
the UPS. Alarm will
continue beeping.
11
Advertisement
