6.4.14 AT+IBCNUUID iBeacon UUID command
Command
Inquiry
AT+IBCNUUID?
Set
AT+IBCNUUID=[para]
Parameter
para(HEX):16 bit UUID
1. Take effect immediately (if the broadcast is not turned on, or it is connected, it will take effect next time),
Note
save when power off
2. The slave or master-slave integrated supports broadcasting, other roles can still be configured;
Set iBeacon UUID as "FDA50693A4E24FB1AFCFC6EB07647825"
For example,
41 54 2B 49 42 43 4E 55 55 49 44 3DFDA50693A4E24FB1AFCFC6EB07647825
6.4.15 AT+MAJOR iBeacon Major command
Command
Inquiry
AT+MAJOR?
Set
AT+MAJOR=[para]
para(HEX): 0X0001-0XFFFF
Parameter
default:
1. Take effect immediately (if the broadcast is not turned on, or it is connected, it will take effect next time),
Note
save when power off;
2. Only the slave device supports broadcasting, other roles can still be configured;
6.4.16 AT+MINOR iBeacon Minor command
Command
Inquiry
AT+Minor?
Set
AT+Minor=[para]
para(ACSII): 0X0001-0XFFFF
Parameter
default:
1. Take effect immediately (if the broadcast is not turned on, or it is connected, it will take effect next time),
Note
save when power off;
2. Only the slave device supports broadcasting, other roles can still be configured;
Copyright ©2012–2020,Chengdu Ebyte Electronic Technology Co.,Ltd
Response
+OK=[para1]
+OK:success
+ERR=[NUM]:error
Response
+OK=[para]
+OK:success
+ERR=[NUM]:error
Response
+OK=[para]
+OK:success
+ERR=[NUM]:error
15